Retrospec
Retrospec Weekender iSUP Electric Pump
Regular price
$99.99
Take the hassle out of inflating and deflating your iSUP so you can save energy for the fun part. Inflates in 2-stages in less than 10 minutes and deflates even faster.
12V DC
Power Type
118in
Cord Length
39in
Hose Length
0 to 20 PSI
Pressure Range
One Size Fits All
Compatible with all Weekender iSUPs
LCD Screen
A preset pressure LCD screen allows you to gauge the process of your board being inflated. Whether you’re watching or not, your pump will stop inflating right at the desired PSI (pressure value).
Time Saver
This electric pump inflates and deflates your board. Just connect the hose-end to the inflation inlet or deflation outlet, connect the other end to the air-tap, select the pressure value if inflating, and press On.
Intelligent Pressure System
Hook up your 12 volt DC Electric Pump into your car’s cigarette lighter. All you need to do is preset your pressure value, lock your pump into place, flip it on and wait… go ahead and apply some sunscreen in the meantime.
Specification
- Power Type12V DC
- DC plug-in cord lengt: 118 in / 3M
- Flex-Hose length39 in / 1M
- Pressure Range0 to 20 PSI
- Pressure Max20 PSI
- Standby Mode2 minutes no use
- Powering On/OffPress/hold power button 3 seconds
- Runtime - max20 min.
- Min Cooling Time30 min
- Motor: 2-stageauto-switching low-pressure/high-volume / high-pressure/low-volume
- Gaskets3 sizes: 1 factory installed (thinnest); 2 additional.
